TECHNICAL SPECIFICATIONS ARCHIDLAM 1.5 MM | Plywood |Veneer Wood | Laminates manufacturer in India

 

S.No.PropertiesUnitSpecified value
as per IS 2046:1995,
Type S, HGS
Archidlam Conforms
1Thicknessmm1.5 mm ± 0.15 mm
2Lengthmm2440 mm + 10mm/-0mm
3Widthmm1220 mm + 10mm/-0mm
4Resistance to surface wearRevolution350 (Min.)
5

Resistance to immersion in boiling water                                                                                a) Mass increase                                             

b) Thickness increase                                 

c) Appearance


%                                                

%                                          

Grade


7.5 (Max.)                                                

8.5 (Max.)                                              

Not worse than 4

6Resistance to dry heat at 1800C  Gloss  OthersGradeNot worse than 4
7

Dimensional stability at deviated temperature                                                   

a) Longitudinal                                                 

b) Transverse

 

%                                                  

%

                                                         

0.44 (Max.)                                    

0.86 (Max.)

8

Dimensional stability at 200C                  

a) Longitudinal                                            

b) Transverse

 

%                                                  

%


0.31 (Max.)                                    

0.49 (Max.)

9Resistance to impact by small diameter ballNewton20 (Min)
10Resistance to crackingGradeNot worse than 4
11Resistance to scratchingNewton2.0 (Min)
12

Resistance to staining          

a) Group 1 & 2                                                              

b) Group 3 & 4 


Grade                                

Grade


Not worse than 5                 

Not worse than 4 

13

Resistance to colour change                       

a) In Xenon arc light                                   

b) In enclosed Carbon arc light


Grade                                 

Grade


Not worse than 6                

Not worse than 5

14Resistance to cigarette burnGradeNot worse than 3 
15Resistance to steamGradeNot worse than 4
16Appearance----Should be free from foreign particle