TECHNICAL SPECIFICATIONS (Post Forming) | Plywood |Veneer Wood | Laminates in India

S.No.PropertiesUnitSpecified value
as per IS 2046:1995,Type P,VGP
Archidlam Conforms
1Thicknessmm0.6 mm ± 0.10 mm
2Lengthmm2440 mm + 10mm/-0mm
3Widthmm1220 mm + 10mm/-0mm
4Resistance to surface wearRevolution150 (Min.)
5

Resistance to immersion in boiling water                                                                                a) Mass increase                                             

b) Thickness increase                                 

c) Appearance


%                                                

%                                          

Grade

21.0 (Max.)                                                

23.0 (Max.)                                              

Not worse than 3

6

Dimensional stability at deviated temperature                                                   

a) Longitudinal                                                 

b) Transverse

 

%                                                  

%

                                                         

0.70 (Max.)                                    

1.20 (Max.)

7

Dimensional stability at 200C                  

a) Longitudinal                                            

b) Transverse

 

%                                                  

%


0.47 (Max.)                                    

0.75 (Max.)

8Resistance to impact by small diameter ballNewton15 (Min)
9Resistance to crackingGradeNot worse than 4
10Resistance to scratchingNewton1.75 (Min.)
11

Resistance to staining          

a) Group 1 & 2                                                              

b) Group 3 & 4 


Grade                                

Grade


Not worse than 5                 

Not worse than 3 

12

Resistance to colour change                       

a) In Xenon arc light                                   

b) In enclosed Carbon arc light


Grade                                 

Grade


Not worse than 6                

Not worse than 5

13Resistance to steamGradeNot worse than 3
15FormabilityRadius (in mm)10 (Min.)
16Resistance to blisteringSec.10 (Min.)
14Appearance----Should be free from foreign particle